PROMPT LIBRARY

Industrial & Automotive: system prompts for agents.

Role prompts and system prompts maintained in awesome-prompts, grouped by field. Copy one into Claude Code, Codex or any chat model.

Six system prompts for hardware and safety engineering. Paste one as the system prompt, then describe your part, board or system. Below each one is the question we sent and what came back, from Claude Haiku 5.5 on November 15, 2026, with tools turned off.

6 Industrial & Automotive prompts

Agentic CAD & Hardware Designer EN

Parametric CAD and hardware-design engineer: STEP-first build123d/Python parts and assemblies, natural-language spec → CAD brief, enclosures/fixtures/joints/mating, URDF/SDF/SRDF robotics descriptions, source-controlled geometry with validated exports; based on earthtojake/text-to-cad (Apr 2026, 2952 stars)

Automotive Functional Safety Architect EN

ISO 26262 safety architect: HARA with Cartesian malfunction analysis, ASIL decomposition, FSC/TSC derivation, HW-SW interface design, ISO/SAE 21434 cybersecurity concept, ISO 21448 SOTIF validation, GSN safety-case argument; every artifact paired with implicit reviewer gate; based on jherrodthomas/automotive-skills-suite (May 2026)

Embedded Firmware Engineer EN

Production-grade MCU firmware: ESP32/ESP-IDF, STM32 HAL/LL, Nordic nRF5/Zephyr, FreeRTOS; static allocation discipline, ISR minimalism, protocol state machines (UART/SPI/I2C/CAN/BLE), memory-safety rules, stack watermark verification; based on GammaLabTechnologies/harmonist (Apr 2026, 1788 stars)

Industrial Robotics Architect EN

ISO 10218 / ISO/TS 15066 / ISO 3691-4 robotics architect: machinery safety lifecycle (ISO 12100 → ISO 13849 / IEC 62061), cobot biomechanical limits and SSM/PFL, AMR fleet safety with VDA 5050, ROS2 system architecture, IEC 62443 OT cybersecurity, FAT/SAT V&V; every artifact paired with implicit reviewer gate; based on jherrodthomas/robotics-skills-suite (May 2026, 510 stars)

PCB/EDA Design Architect EN

Production-grade PCB design architect: schematic review, PCB layout analysis, Gerber verification, DRC/ERC, net tracing, SPICE simulation, EMC pre-compliance (FCC/CISPR), DFM validation, multi-supplier BOM sourcing; based on aklofas/kicad-happy (Mar 2026, 398 stars)

Verilog RTL Architect EN

Production-grade Verilog-2001 RTL generation and FPGA design workflows: staged generation (regular/deep-review/agentic-repair), existing-RTL analysis/refinement/verify-repair, AXI-Stream/AXI4-Lite/AXI4/AHB/APB interface templates, static lint, self-checking testbench scaffolds, ASIC-quality review, Vivado/VCS/iverilog backend validation; based on Eriemon/verilog-generator (May 2026, 160 stars)

How to use these prompts, with example replies

Automotive Functional Safety Architect: ISO 26262 work products

We asked what hazard analysis an electric parking brake needs and which ASIL fits unintended release on a slope. It answered ASIL B as the indicative target, rising to C if slope parking reaches 1% of operating time, marked its severity, exposure and controllability values as assumptions, and laid out the item definition, HARA, functional and technical safety concepts, a cybersecurity TARA, SOTIF and a safety case outline. Source: Automotive Functional Safety Architect

Industrial Robotics Architect: a cell safety concept

We described a 6-axis arm picking 30 parts a minute from a conveyor, with an operator entering to clear jams. It returned a hazard table rating each safety function at PLd, Category 3, a guard door with guard lock, entry presence sensing, the ISO 13855 safety distance formula, a jam-clear sequence with reset from outside the cell, a compliance matrix and a test plan, with unknowns such as payload numbered as open items. Source: Industrial Robotics Architect

Agentic CAD & Hardware Designer: a parametric part in build123d

We asked for a PETG wall bracket for a 2 kg router with screw holes 60 mm apart. It wrote a CAD brief with the load and print orientation, a parametric build123d script for a plate, shelf and front lip with counterbored M4 holes, a hand stress check, and next steps. It marked the script as untested, since our session had file and shell tools turned off, so run it before you print. Source: Agentic CAD & Hardware Designer

Embedded Firmware Engineer: debugging a FreeRTOS stack overflow

We said an ESP32 task that reads a BME280 every second and publishes over MQTT overflows its stack after hours. It called the overflow a symptom, proposed a sensor task feeding a fixed-size queue into the MQTT side with vTaskDelayUntil and static buffers, and gave steps to find the trigger with uxTaskGetStackHighWaterMark and heap checks. Source: Embedded Firmware Engineer

PCB/EDA Design Architect: stackup and placement

We asked for a 4-layer stackup and placement for an STM32, a USB-C port and a 12 V to 3.3 V buck. It gave signal, ground, power, signal layers with a solid ground plane under everything, 90 Ω differential pairs for USB, then placement by noise: USB-C with ESD and CC resistors at the edge, the buck with the smallest hot loop away from the MCU, and a pre-release checklist. Source: PCB/EDA Design Architect

Verilog RTL Architect: a UART receiver with testbench

We asked for a synthesizable 115200 baud UART receiver from a 50 MHz clock. It wrote a parameterized module with a two-flop synchronizer, 434 clocks per bit, sampling in the middle of each bit and a framing error flag, plus a testbench, and noted the 0.006% baud error. It asked us to run the testbench in iverilog or Vivado before relying on it. Source: Verilog RTL Architect